If you are looking to purify water from salts at home, then you suffer from a high percentage of salts in the water, and in this case you must make a decision to get rid of this problem because it may cause you problems in the future or cause harm, especially to children, pregnant women, and during breastfeeding.
Water pollution is still a serious matter that concerns many people because it causes serious health problems. Therefore, water must be purified from waste, salts, bacteria, heavy metals, and chlorine in order to drink properly clean water.
There are some ways to solve this problem in order to obtain clean water inside the home and sterilize the water from germs, microbes, and all pollutants and excess salts found in tap water. You must follow these steps, and we will show you through the Smartly website the method of purifying water from salts inside the home and the types of pollutants inside the water.
Types of pollutants in water
Natural pollution
What is meant by natural pollution is that which changes the natural properties of water, making it unpalatable for human use due to a change in its temperature or salinity, or an increase in suspended matter, whether organic or inorganic. An increase in water salinity results from an increase in the amount of steam in lake or river water, especially in dry places without water. Renewing it leads to a change in the water’s properties, colour, smell and taste.
chemical pollution
It is when the water has a toxic effect as a result of the presence of dangerous chemicals inside the water, such as lead, mercury, cadium, and pesticides, which are divided into two types: one that is soluble and one that is capable of accumulating and gathering in the organisms that live inside the water, which represents a major threat to human health and life and is one of the most famous types of pollutants. It is oil spills and pollution with pesticides and agricultural fertilizers such as phosphates and nitrates, as well as factory waste.
Organic contamination
It is the mixing of drinking water with wastewater because wastewater contains large quantities of bacteria that cause serious diseases such as salmonella, which causes typhoid fever, intestinal and viral infections, cirrhosis, diarrhea, and dehydration, especially in children, because it causes them polio, cholera, yellow fever, scabies, and many other dangerous diseases. By drinking, bathing, and preparing food, this water must be purified from pollution caused by sewage.
Water purification filters have been created to confront all of these pollutants and prevent them from crossing into the tap to ensure the safety and health of the family.
How to purify water to get rid of pollutants inside the home without a water filter:
Purifying water from salts involves a number of stages and methods, including:
Water storage
It is placing water in open containers from 5 to 24 hours. This helps to precipitate a large portion of salts and impurities and kills a high percentage of bacteria, fungi, and microorganisms.
Water filtration and filtration
We filter the water from salts through a piece of cloth made of cotton.
Water aeration
It is allowing the air filled with oxygen to dissolve the water by putting it in a bottle, closing it and shaking it, and this helps to get rid of impurities, salts, bacteria and manganese.
Boil water
This helps get rid of chlorine and bacteria that give the water an unpleasant taste so that the water becomes pure. It is recommended to boil the water for one minute and put it in the refrigerator until it gains part of the oxygen that it loses in boiling.
Purifying water from salts through reverse osmosis filters
Water filtration is considered to get rid of harmful organic compounds and chlorine to drink clean water. It depends on five stages: sediment filtration to remove solids and impurities suspended in the water, carbon filter to remove chlorine, lead, herbicides and other pollutants, “micron” filter to remove fine particles, reverse osmosis membrane for water filtration. And getting rid of microorganisms in the room designated for filtration, the carbon filter is the last filter to improve the quality and taste of the water.
How to purify water from salts inside the home
There are many areas that cannot obtain fresh drinking water inside the home, and it is very salty. They do not have salt water from the sea or salty groundwater as well. Certainly, this water causes a severe threat to the health of the body and living organisms, as it causes kidney failure and cancer diseases in addition to Diseases of the heart and digestive system. Hence, people began searching for a safe way to purify water from salts and impurities so that people can obtain completely pure water free of any contaminants, suitable for drinking, cooking, and home uses. There are some ways to desalinate water from salts inside the home.
By distillation process:
It is placing salt water in a huge vessel, such as a kettle, connected by a tube to another vessel containing cold water. The salt water is boiled until it evaporates and is condensed inside the tube in the other vessel. Here we get completely pure water, free of salts, at the lowest cost.
Desalination of water from salts using reverse osmosis filters
It is the ideal solution for water purification because it is able to transform salt water into completely healthy, pure drinking water without the hassle, just like natural water from the tap, and it performs its role while the water arrives before the tap so that the filter performs its specialized process, which is water purification.
Purifying and disinfecting water from salts is extremely important because it guarantees good health for you and your family, and that polluted water carries with it dangerous diseases for humans. It is necessary to purify and desalinate the water according to the capabilities available in the environment in which you live, but in the end, all we want is to obtain clean, healthy, free water. From germs and microbes so that we can enjoy drinking healthy and beneficial water for us and our family